Fitting Loose Prints

Fitting your artwork is a simple process if you know how to do it right.

There are a few easy steps can make this process significantly more simple for all of you at home.

Professional framer's tip: If you have several frames to do, invest in some compressed air in a can to help with dust removal. It will make clearing the glass far simpler.

Step One: Remove frame backing

Firstly, wash your hands and make sure they are dry to ensure you don't mark the work.

Start by opening up your new frame and removing the backing. You should never need to remove your glass, so leave it in the frame with the face of the frame facing down. We make the glass super snug to fit the frame, and it will break if you attempt to remove it past the pins.

Step Two: Check the glass

Check the glass for dust and marks. A clean microfibre cloth is great for getting rid of anything, or some compressed air in a can if you have any.

It can help if you place the frame over the print as dust will show up more easily.​

DO NOT use any ammonia based glass cleaner products if cleaning UV Glass. It will ghost and damage the protective film causing it to look hazy and no longer protect your work.

CLICK HERE for our cleaning recommendations. 

Step Three: Place your print

Before placing your print into the frame, check to make sure there is no dust on the print itself. Use your clean microfibre cloth​, or some compressed air in a can if you have some.

Gently put the print into the frame, ensuring the orientation matches the piloted holes for the hanging kit. These need to be on the top half of the print.

Replace foam backing.

Still curious? Check out these related articles!